Bullard Air Respirators & CO Monitors

Respiratory Protection / Clean Air Systems


According to OSHA 1910.134, if hazards are present in the working environment with concentrations above the Permissible Exposure Limit (PEL), and the hazard cannot be eliminated or reduced with engineering or administrative controls, then, according to the standard, a written respiratory protection program should be established. As part of that program, a respirator should be selected and used according to the manufacturer’s instructions.


Clean Air Boxes/Panels



Bullard Clean Air Boxes (CAB) offer superior breathing air filtration in a durable easy to use format. OSHA requires that employers provide their workers wearing airline respirators with Grade D breathing air. Bullard Clean Air Boxes provide 3-stage filtration and carbon monoxide (CO) monitoring to help meet this requirement.



Carbon monoxide (CO) Monitors and Alarms


This compact, durable unit connects easily to any compressed breathing air source (connection kit included). The monitor is factory set to sound a 93 dB alarm when CO level exceeds 10 ppm, the OSHA limit. Monitors are also available with a CO alarm set point of 5 ppm to meet CSA and certain international requirements. External operation lights show green for normal and red for alarm for easy visual monitoring. An alarm jack to allow connection to remote alarm devices is standard.

Electric Driven Free-Air Pumps



When placed in a clean air environment, Bullard Free-Air® pumps offer a low-cost means of supplying clean, breathable air to respirator wearers working in contaminated environments up to 300 feet away from the pump. They are easy to operate and maintain. Free-Air pumps do not require temperature alarms, CO monitors or airline filters, so they can be a cost-effective alternative to compressed air.

Masks and Hoods

Spectrum Series Full Face Respirator


The Full-Face Spectrum takes the work out of wearing a respirator. The Spectrum Continuous Flow Supplied Air Respirator is compatible with economical low-pressure air sources such as Bullard Free-Air® pumps or with conventional breathing air compressors or cylinders. Spectrum meets ANSI/ISEA Z87.1+ 2010 Impact Face Protection and OSHA Assigned Protection Factor (APF) of 1,000.

CC20 Series Hoods


The CC20 Series PAPR Hoods provide a wide variety of simple, effective and economical options for on-the-job respiratory protection. The result is better protection, improved productivity and greater comfort that combines to produce the best value on the market. Available for use with EVA, EVAHL or in a CC20 Series supplied Air Respirator configuration.



Bullard offers a variety of hoses and fittings to deliver breathable air to workers from a clean air source.

V10 Series Hose


Bullard V10 Series hose is intended for use with compressed air and has an inside diameter of 3/8”. Constructed of strong, yet flexible, EPDM rubber reinforced to prevent crushing or kinking, V10 Series hose is available in 25-, 50- and 100- foot sections configurable up to 300 feet in total length.

V20 Series Hose


Bullard V20 Series hose is intended for use with Bullard Free-Air® Pumps and has an inside diameter of 1/2”. Constructed of strong yet flexible EPDM rubber reinforced to prevent crushing or kinking, V20 Series hose is available in 25-, 50- and 100-foot sections configurable up to 300 feet in total length.